Hard water is a fact of life in and around Phoenix, but there are ways of addressing this ubiquitous problem. Overly hard water contains high concentrations of minerals like calcium and magnesium, and these will interfere with the formation of suds, stain when they precipitate out, and cause many other issues.
Fortunately, phoenix water softener installers are ready to equip homes with systems that address this situation head-on. When it comes to choosing the best water softener phoenix, residents are sometimes confused by the various methods employed to measure and rate such systems. In practice, a little bit of research will reveal that things are fairly straightforward.
Common Water Softener Ratings, Measurements, and Metrics
What typically matters most when choosing among the water softeners phoenix providers stock and install is selecting a system that will accommodate a home's usual needs at an affordable price. There are different figures that are commonly used to describe how particular softeners perform, including:
Hardness removal capacity. Water softeners of the most common design are not capable of operating continuously. Instead, they can remove a certain amount of dissolved mineral material from water before needing to recharge to start the cycle again. The relatively small masses involved are most often measured in units called "grains," with about 440 of these making up a single ounce. A system that is said to be able to remove more grains of hardness than another before recharging should, in practice, be able to soften more water at the same location, as well.
Salt used per cycle. When a water softener phoenix residents rely on recharges itself, it will use up a certain amount of salt in the process. This typically configurable number will influence the convenience and overall cost of operating the system, as using more salt will mean needing to restock the consumable supply more frequently. While looking at this number can be productive, it should not be viewed in isolation. After all, a system that uses twice as much salt to soften four times more water could be significantly more efficient, as a result.
Grains removed per pound of salt. Because of this, it will often be most productive to look at a metric that conveys information about efficiency more directly. Some manufacturers will detail, for instance, how many grains of hardness their systems can remove with the use of one pound of salt.
The Experts Can Always Help
Given that it will not always be immediately clear how such factors will influence the suitability of particular systems, turning to others for advice will often be helpful. Fortunately, there will normally be straightforward ways to choose an appropriate water softener for any home.